MY HONDA CITY

To begin daubing of your garage it is necessary from a ceiling, then — top of walls and then a bottom. Before daubing it is necessary to humidify a surface to prevent sliding of the first coat, which do not level that it was well linked with a floating, put on it.

At daubing of walls, a box with a solution usually put on distance of one meter from a wall. For this purpose it is necessary to take in the left hand the hawk, and in right — trowel. One end of the hawk to put aboard a box with a solution, and other to raise a little above (if a solution liquid you should keep hawk horizontally). To take a portion of a solution with trowel from a box and to lay at first on lifted, and then on the bottom part of the hawk. With a solution on the hawk to approach to the prepared place, to take with a trowel a portion of a solution and to throw it on a plastered surface, thus the hawk to keep slightly having inclined and to follow that the solution did not flow down from the hawk and did not fall on a floor. A hand executes the solution throw with trowel. The hand wave shouldn’t be strong, at a wall should be stopped that the solution was not sprayed. The most convenient position is a putting of a solution from left to right. Level a solution with the hawk.

It is possible to smear a solution directly from the hawk, and it shouldn’t be very dense, differently it is necessary to press the instrument hardly. A portion of a solution put on the falcon, put it to a wall and, pressing on the hawk with trowel, smears a solution on a wall, moving the hawk from below to the top. Usually at pasting from the hawk a solution simultaneously also level with the help of a rasp. You should put it to a surface with the put solution, lift the top edge and with pressing lead on a wall from below upwards, and on a ceiling on yourself. After leveling with rasp flatness of plaster check with the float. For this purpose the float apply to plaster in all directions. There, where was roughness, put a solution repeatedly.

Finishing works of daubing are setting and scouring. Setting is possible to paste directly from the hawk and it is necessary to put on a surface of walls and ceilings thin layers. The more purely and more carefully you will level a solution, it will be easier to make scouring. Scouring is made by means of a rasp as follows: you should densely press the rasp to a surface of plaster and do circular motions counterclockwise. Roughness is cut off with a rasp edge. There, where the surface was made convex, it is necessary to press a rasp stronger, where bent — weaker.

If you try to make daubing yourself once, next time it will be easier for you to make it.

If you need car garage – this site will help. Lots of samples of car garage products and direct access to the car garage sellers. All contact info on the site.

P.S. And don’t let laziness to stop you from finding the best deal about car garages. Don’t forget that we are living in the world where info makes life easier.

Due to this if you are properly armed with the knowledge in your topic you can be sure that you will in any case find the solution to any bad situation. So, please make sure to visit this web site on a regular basis or – the easiest way to take care of it – sign up to its RSS feed. Thus you will have a direct shortcut to the freshest info updates here. Blogging can be helpful, you just need to know how to use them.